Soil Testing
Showing 33–48 of 66 results
-

Nold Deaerator Water System
The Nold self contained deairing system produces 6 liter batches of deaired water to less than 0.5 ppb dissolved oxygen… -

Permeability / Triaxial Panel
The S-500 permeability panel / triaxial panel allows the accurate measurement of working pressures, volume change, and fluid flow. -

Permeability and Triaxial Cells
The DGSI Triaxial and Permeability Cells are designed to accommodate samples with diameters from 1.4 to 12 in (35 mm… -

Permeant Interface Device
The Permeant Interface Device is used in permeability testing when a corrosive fluid is used as the permeant. -

Pin-Hole Dispersion Device
This Pin-Hole Dispersion Device test is used for evaluating clay soils for erodibility by flowing water through a small hole… -

Pneumatic Tester
A pneumatic air cell provides the vertical load to the specimen through two pneumatic pistons. - Order Now

Pocket Penetrometers
Pocket Penetrometers are commonly used on split spoon and thin walled tube samples to evaluate consistency and approximate unconfined compressive… -

Pore Pressure Transducers
General-purpose pressure transducers may be used to measure pressure of gases. -

Portable Soil Resistivity Meter
The S-298 Soil Resistivity Meter is a battery operated, solid state device to evaluate ground conductivity as well as a… - Order Now

Probe Rods
The Fiberglass Probe Rod is safe, non-conducting probe is ideal for locating irrigation, power and water lines. -

Proctor Penetrometer Test Set
The S-172 serves as a rapid field test to determine the approximate amount of moisture in the soil. -

Proving Rings
Proving Rings have a repeatability of 0.2% and an accuracy of 1% or better. -

S-330 Automated Soil Compactor
Mechanical compaction of soil and soil-cement mixtures in the laboratory. -

Terraload Consolidation Device
On this oedometer, load is applied by compressed air via a piston coupled to a rolling diaphragm. -

Sample Ejector
The Sample Ejector is designed for fast extrusion of samples from compaction molds. -

Sample Extruder
The Sample Extruder efficiently extrudes samples up to 3 x 36 inches from Shelby tubes.
