Dial Calipers

Measurements may be made with one hand, using a thumb roller for fine adjustments and a thumb screw to lock the jaws.

Bar graduations are 0.1 in, dial indicator graduations are 0.001 in and one revolution corresponds to 0.1 in. Available in 6- and 12-in lengths in a protective case. 6-in version is provided with a depth rod. The depth rod is an option on the 12-in model.

Digital Dial Caliper

The digital dial caliper is used for measuring inside and outside lengths in inch or metric units with readings displayed on an LCD readout. Made from hardened stainless steel with knife-edge contacts. Readout provided with a push button to change units and an outlet jack for downloading data to a computer or data logger. The readout can be set to zero at any position, hold, or peak at low or high readings. Depth rod attachments are available.

Ranges are 0-12 or 6-300 mm with an accuracy of ±0.001 in or ±0.025 mm. Readout resolution is 0.0005 in or 0.012 mm. Operates on two 1.5-volt batteries and is supplied with a protective case.

See our Deep-jaw caliper.

Outside Micrometer Caliper

Ideal for taking measurements on 6-in concrete cylinders and cubes. This caliper has a measurement range between 5.5 in and 6.5 in with a resolution of 0.001 in. The frame is made from forged steel with a black enamel finish. The standard jaw depth of the calipers are from 1.75 – to – 2 in. All numbers and graduations are etched for easy reading and durability. Supplied in a protective case.

Please refer to the ordering information tab below before making your selection.