Well Seals
The DGSI well seals provide an easy method to connect fluid and air lines, simplifying installation. Strain relief seals isolate the individual tubing sizes that support the operation of a pneumatic pump from the particle vacuum being placed on the well for methane removal.
The well seals are attached to the casing by mating flanges or by sealing on the diameter of the well casing with a Fernco-type flexible coupling. Additional threaded openings through the seals are provided for fluid level, pressure, and temperature measurement.
Please refer to the ordering information tab below before making your selection.
Request to Quote
 |  |  | |||||||
| Style | Flange | Flange w/ 2″ FNPT | Plug | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Diameter | 6″ | 8″ | 10″ | 8″ | 4″ | 6″ | 8″ | ||
| Part No. | TR-27601 | TR-27602 | TR-27603 | TR-27604 | TR-272 | TR-271 | TR-270 | ||
 | |
| Style | 6″ Plug w/ Methane Extraction |
|---|---|
| Part No. | TR-27006 |
 |  | |
| Style | Plug w/ Methane Extraction | Flange w/ Methane Extraction |
|---|---|---|
| Part No. | TR-27005 | TR-27605 |
 | |
| Style | E-Valve |
|---|---|
| Part No. | TR-697 |
 |  | |
| Part No. | TR-274 | |
|---|---|---|
 |  | |||||
| Style | Fluid Out Manifold | Air In Manifold | ||||
|---|---|---|---|---|---|---|
| Diameter | 2″ | 3″ | 4″ | 2″ | 3″ | 4″ |
| Part No. | TR-27501 | TR-27502 | TR-27503 | TR-27501 | TR-27502 | TR-27503 |
 |  | |
| Kit Type | Exhaust Diverter Kit | Exhaust Restrictor Kit |
|---|---|---|
| Part No | TR-280 | TR-281 |
Well seal accessories include an air-in / fluid-out kit, manifold flanges, pump exhaust diversion kit, and pump flow control. Each well seal assembly includes hose clamps for attaching bundled Nylon™ tubing to an SRX pump and cable clips for securing the stainless steel cable for pump support.
Strategic mounting brackets that provide support for filter regulators and pulse counters are standard on all well seals.
