Fixed Ring Consolidometer
The Fixed Ring Consolidometer is supplied with a burette to allow for permeability tests to be conducted at the same time as the Consolidation Testing.
It is 1 in (2.54 cm) high with a 2.5 in (6.4 cm) ID, made from stainless steel with 1/8 in NPT drainage ducts. It comes with upper and lower porous stones.
Please refer to the ordering information tab below before making your selection.
Request to Quote
| Model | Description |
|---|---|
| S-455 | Fixed Ring Consolidometer, 2.5 in dia. |
| S-4551 | Fixed Ring Consolidometer, 50 mm dia. |
| S-4552 | Fixed Ring Consolidometer, 70 mm dia. |
Related products
-
Floating Ring Consolidometer
Normally used with the Terraload Device. -
Constant Rate of Strain Consolidometer
This DGSI Consolidometer uses the S-510 Triaxial Cell to apply vertical load and allow pore pressure measurement. -
Expansion Index Consolidometer
This consolidometer is used to test remolded specimens for expansion. -
Terraload Consolidation Device
On this oedometer, load is applied by compressed air via a piston coupled to a rolling diaphragm.