Deairing Water Tank
The chamber is 6 inches in diameter by 16 inches high (15.2 x 40.6 cm) and is made from clear, cast acrylic. The head and base are anodized aluminum and are connected by stainless steel tie rods. The head has two fittings, one to allow a tube to pass through to the bottom of the chamber for filling and extracting, the other to allow connection to a vacuum or pressure source.
Request to Quote
| Model | Description |
|---|---|
| S-505 | Deairing Water Tank |
Related products
-

Permeability and Triaxial Cells
The DGSI Triaxial and Permeability Cells are designed to accommodate samples with diameters from 1.4 to 12 in (35 mm… -

Sand/Gravel Permeameter
Sand/Gravel Permeameter -

Compaction Permeameter
The Compaction Permeameter uses standard 4 in and 6 in compaction molds for falling or constant head permeability tests. -

Split Vacuum Molds
Designed to fit directly onto the Durham-Geo triaxial cell pedestal.

