Sleeve Compaction Rammers


The manual Sleeve Compaction Rammers conform to ASTM and AASHTO standards. All rammers have a 2 in (5.1 cm) diameter face. They are provided with a loosely fitting guide sleeve to control drop height without restricting the free fall of the weight. The weight is mounted on the end of a rod. Guide sleeves have four vent holes at each end to allow free air flow during use.

sleeve compaction rammers

Applicable Standards

Model S-310

  • ¬†ASTM: D 558, D 559, D 560, D 698
  • AASHTO: T-99, T-134, T-135, T-136

Model S-311

  • ASTM: D 1557
  • AASHTO: T-180
S-310Sleeve Compaction Rammer, 5.5 lb (2.5 kg) weight, 12 in (30.5 cm) drop
S-311Sleeve Compaction Rammer, 10 lb (4.5 kg) weight, 18 in (45.7 cm) drop