Portable Tiltmeter


The portable tiltmeter is used to monitor changes in the inclination of a structure. Tiltmeter data can provide an accurate history of movement of a structure and early warning of potential structural damage. Typical applications include:

  • Monitoring rotation caused by mining, tunneling, soil compaction, or excavation.
  • Monitoring rotation of concrete dams and retaining walls.
Portable Tiltmeter


The tiltmeter system includes a number of tilt plates, the portable tiltmeter, and a readout unit. Tilt plates are available in ceramic or bronze. Both are dimensionally stable and weather resistant. Protective covers are available for bronze tilt plates.

The portable tiltmeter uses a force-balanced servo-accelerometer to measure inclination. The accelerometer is housed in a rugged frame with machined surfaces that facilitate accurate positioning on the tilt plate. The bottom surface is used with horizontally-mounted tilt plates and the side surfaces are used with vertically-mounted tilt plates.


Tilt plates are mounted on the structure in specified locations. They are typically bonded to the structure, but may also be screwed to the surface.

To obtain tilt readings, the operator connects the tiltmeter to the readout unit, positions the tiltmeter on the tilt plate, and notes the displayed reading. The operator then rotates the tiltmeter 180 degrees and obtains a second reading. Later, the two readings are averaged to cancel sensor offset. Changes in tilt are found by comparing the current reading to the initial reading.

Portable Tiltmeter Digitilt Readout


Economical: One tiltmeter can be used to monitor any number of inexpensive tilt plates.

Easy to Install: Ceramic tilt plates are bonded to the structure; bronze tilt plates can be bonded or screwed to the structure.

Easy to Use: Tilt readings are obtained quickly and easily by a single operator.

Rugged, Reliable, and Accurate: The tiltmeter uses the same proven accelerometer technology used in the Digitilt inclinometer probe.

For more information

Please download the Portable Tiltmeter Datasheet and Portable Tiltmeter Manual. These can be viewed and printed with Adobe Acrobat Reader.

Two readouts can be used with the portable tiltmeter: the Digitilt 09 and the Digitilt DataMate. The Digitilt 09 readout simply displays readings, and the operator writes the reading in a data book. This is the normal practice for tiltmeters. The Digitilt DataMate is really designed to record inclinometer surveys, but it also has a manual mode for displaying readings that can be hand recorded. Its recording mode is not really useful with the tiltmeter.

Portable Digitilt Tiltmeter Specifications

Metric Tiltmeter50304410Includes case and jumper cable (3 m) for connecting to readout
SensorDigitilt uniaxial force-balanced servoaccelerometer
Range±53° from vertical
Resolution8 arc seconds
System Repeatability±40 arc seconds
MaterialsStainless steel frame, anodized aluminum housing
Dimensions152 x 89 x 178 mm
Weight4.5 kg
English Tiltmeter50304400Includes case and jumper cable (10’) for connecting to readout
SensorDigitilt uniaxial force-balanced servoaccelerometer
Range±35° from vertical
Resolution10 arc seconds
System Repeatability±40 arc seconds
MaterialsStainless steel frame, anodized aluminum housing
Dimensions7 x 10 x 7 inch
Weight10 lb
Tilt Plate50307300
Mounting MethodEpoxy bonding compound or screws
Diameter140 mm (5.5″)
Height24 mm (0.95″)
Center Hole63 mm (2.5″).
Weight0.68 kg (1.5 lb)
Tilt Plate Cover50307350Includes anchors
Epoxy Bonding Compound503055000.45 kg (1lb). For mounting up to five tilt plates. Requires ambient temperature above 4.5 °C (40 °F) for curing
Compatible readouts include the DigitiltDataMate and the retired Digitilt 09