Sleeve Compaction Rammers
Description
The manual Sleeve Compaction Rammers conform to ASTM and AASHTO standards. All rammers have a 2 in (5.1 cm) diameter face. They are provided with a loosely fitting guide sleeve to control drop height without restricting the free fall of the weight. The weight is mounted on the end of a rod. Guide sleeves have four vent holes at each end to allow free air flow during use.

Applicable Standards
Model S-310
- ASTM: D 558, D 559, D 560, D 698
- AASHTO: T-99, T-134, T-135, T-136
Model S-311
- ASTM: D 1557
- AASHTO: T-180
Model | Description |
---|---|
S-310 | Sleeve Compaction Rammer, 5.5 lb (2.5 kg) weight, 12 in (30.5 cm) drop |
S-311 | Sleeve Compaction Rammer, 10 lb (4.5 kg) weight, 18 in (45.7 cm) drop |