Load Cells

Load Cells

Applications

Load cells measure the total load applied to a sample.

Description

Durham Geo S-Type load cells display excellent long term stability and have significant overload characteristics to protect against accidental damage. They are made in a variety of ranges and are easily adapted to any type of load frame. Select from the range, or contact us for information on other ranges available and calibration in other engineering units.

Load cells have tapped female ends with 1/2 x 20 tpi for E-210 and E-212, and 3/4 x 16 tpi for E-214, E-215, E-216 and E-217.

Durham Geo Load Cells
Durham Geo Load Cells
Model
Description
Range
Readability
(lbf)
(kN)
(lbf)
(kN)
E-210 S-Type 0.5k 500 2.2 0.1 0.0004
E-212 S-Type 2.5k 2,500 11.1 1.0 0.004
E-214 S-Type 6.0k 6,000 26.7 1.0 0.004
E-216 S-Type 10.0k 10,000 44.5 1.0 0.004
E-215 Cylindrical Type 6.0k 6,000 26.7 1.0 0.004
E-217 Cylindrical Type 10.0k 10,000 44.5 1.0 0.004

For More Information

Please download the datasheet for Center-Hole Load Cells.

Load Cells Specifications

LOAD CELL SPECIFICATIONS
Sensor Type Resistance strain gauges wired to provide a single output of 2.5mv/v ±10%
Part Numbers, Range, & Dimensions See table at below
Linearity 1% FS
Overload Capacity 100%
Centralizer Centralizer is used to center load cell on tiebacks or rock bolts. User can adjust inside diameter of centralizer within range listed in table
Signal Cable Attached to load cell at factory. Must be ordered at same time as load cell
LOAD CELL PART NUMBERS, RANGE, AND DIMENSIONS
English Unit Specifications
Load Cell Capacity US Ton ID x OD x Height Inches Bearing Area Inch2 Centralizer Centralizer ID, Inch
51301050 50 1.67 x 3.5 x 3.25 1.67 51302117 0.5 to 1.5
51301100 100 1.67 x 3.5 x 3.25 3.33 51302117 0.5 to 1.5
51301152 150 2 x 4.25 x 3.5 5 51302120 0.5 to 1.5
51301153 150 3 x 5 x 4.5 5 51302130 1.0 to 2.5
51301225 200 2.5 x 5 x 4.5 6.67 51302125 1.0 to 2.0
51301235 200 3.5 x 6 x 5.5 6.67 51302135 1.5 to 3
51301330 300 3 x 6 x 4.5 10 51302130 1.0 to 2.5
51301340 300 4 x 6.63 x 6 10 51302140 1.5 to 3.5
Metric Equivalent of Specifications Above
Load Cell Capacity Metric Ton ID x OD x Height mm Bearing Area mm2 Centralizer Centralizer ID mm
51301050 45 42 x89 x83 1077 51302117 13 to 38
51301100 90 42 x 89 x 83 2148 51302117 13 to 38
51301152 135 51 x 108 x 89 3225 51302120 13 to 38
51301153 135 76 x 127 x 114 3225 51302130 26 to 64
51301225 180 64 x 127 x 114 4303 51302125 26 to 51
51301235 180 89 x 152 x 140 4303 51302135 38 to 76
51301330 270 76 x 152 x 114 6451 51302130 26 to 64
51301340 270 102 x 168 x 152 6451 51302140 38 to 89
SIGNAL CABLE & CONNECTORS
Signal Cable 50613527 Shielded cable with seven 22-gauge tinned-copper conductors and polyurethane jacket. Specify cable length required for each load cell
Universal Connector 57705001 Connector is not required when load cell is used with data logger
Universal Terminal Box 57711600 Provides connections for 12 sensors and an indicator. Sensors selected by rotary switch. Weatherproof fiberglass box measures 290 x 345 x 135 mm (11.5 x 13.5 x 5.25"). Not required when load cell is connected to data logger
READOUTS & DATA LOGGERS
CR10X Data Logger 56701110 CR10X can read the centerhole load cell. Up to five load cells can be connected to each AM16/ 32 multiplexer. See separate data sheet
DataMate MP 57710900 DataMate MP readout can read center hole load cells. See separate data sheet
Load Cell Indicator 51300900 Portable indicator for center-hole load cells. Displays, but does not record readings. Includes battery, charger, and jumper cable. Specify plug type needed for charger. Also specify if you are using the universal connector or terminal box, since they require a special jumper