July 31, 2024
Atlas accepts only text files. The most common formats are listed below:
| Campbell Scientific Table Based TA05 Format Description: “yyyy-mm-dd hh:mm:ss”,recno,value1,value2,value3,value4,value n, Example: “2008-01-06 12:00:00”, 3068.8,11.5,3045.5,12.6, Notes: – date stamp is quoted (” “) – date is fixed: yyyy-mm-dd. No variations are allowed. – date separators are hyphens ( – ) – recno is a record number. Atlas does not use the number, but requires at least a blank field. – decimal character is a dot ( . ) – value separators are commas ( , ) – TA05 normally has a header. Atlas ignores the header, if present. |
| Serial Number Format Description: “yyyy-mm-dd hh:mm:ss”, recno ,”serial1″,value1,value2,”serial2″, value1,value2,value3, Example: “2011-10-27 22:00:00”,“33853”,12.86,7.137,“15766”,12.77,0.558,6543, Notes: – Same as Campbell table format, but has embedded serial numbers. – date stamp, decimals, and value separators are same as in Campbell format above. – serial numbers are quoted. Atlas uses serial numbers to assign values to the proper sensor. – each serial number can be followed by an arbitrary number of values (if necessary). |
| Atlas Format Description: dd/mm/yyyy;hh:mm:ss;value1;value2;value3;value4 Example: 01/27/2008;12:00:00;3068.8;11.5;3045.5;12.6 Notes: – date is separated from time by a semi-colon ( ; ). – date order can be: dd/mm/yyyy or mm/dd/yyyy or yyyy/mm/dd, etc. – date separator is a forward slash ( / ) – decimal character is a dot ( . ) – value separator is a semi-colon ( ; ) |